copolymer of acrylamide and Acrylic acid

Polyacro-44 has found Application in variety Minerals processing including the following:

• Acid leached CCD
• Potash slimes clarification and dewatering
• ETP/STP’s
• Municipal water and Dewatering
• Base metal concentrates Thickenings and filtration

Dosage depends on Application but normally lies in the range of 2-200g/tone of dry substrate flocculated

• Reduction of the inorganic coagulant dosage
• Increased clarifier throughput
• Reduction of sludge production
• Reduction in overall treatment

under the normal storage within the Temperature range of5-25⁰c(41- 77⁰f) This product will be stable for at least 12 months’ storage outside the specific temperature range for longer period may adversely affect the product over a long period and thus should be avoided if possible It is recommended that stock solutions at 0.25-0.5% are prepared regularly and for maximum effect such solutions should be used within 5 days. Beyond this period some loss in efficiency of the product may occur

Packaging: 25 kg polybag

• Corrosion towards most Standard materials of construction is very low stainless steel, fiberglass, polyethene ,polypropylene and epoxy coated surfaces are recommended .in some cases aluminum surfaces can be adversely affected.
• spilled product is slippery underfoot, very slippery when wet information on the shipping and handling of this product can be found in the relevant MSDS. Disposal of product of product must comply with all national state and local laws.

Detailed information on this Product can be found in the relevant Material Safety Data Sheet(MSDS)

• This data contained in this publication on our current knowledge and experience.
• In view of many factors that may affect processing and application of our product this data does not reveal processors from carrying out their own investigation and test; neither does this data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose.
• Any description, drawings, photographs, data, proportions, weights, etc. given here in may change without prior information and do not constitute the agreed contractual quality of the product.
• it is the responsibility of the recipient of our product to ensure that any proprietary rights and existing laws and legislation are observed